SKIDSTEER ST27 74 HP TURBO DIESEL TRACKED HIGH FLOW SJC CONTROLS CAB AC VERTICAL LIFT

ST27
UNIT INCLUDES:
14-PIN ATTCHMNT CONTROL T3
CB05 CAB TYPE-ENCLOSED-HEAT, A/C
CP04 SELECTABLE EH JOYSTICK CONTROLS
FT12 HIGH FLOW
SSL MFL 2 SPEED JOYSTICK
FT15 BLOCK HEATER (110V) T4F
BUCKET LEVELING, RIDE CONTROL
VARIABLE SPEED FAN
DS02 TWO SPEED DRIVE
REARVIEW CAMERA
POWER HYDRAULIC COUPLER

MECHANICAL OUTPUT SPECS

Ground Pressure (standard track) 4.4 psi
Break Out Force Bucket 5,404.2 lbf
Break Out Force Lift Arm 4,783.3 lbf
Tractive Effort max. at 100% effective force 7,476.9 lbf
Bucket Roll Back 2.1 s
Bucket Roll Out 2.2 s
Lift Arm Raise 3.3 s
Lift arm lower 2.8 s
Travel speed stage 1 6.4 m/H
Travel speed stage 2 9.1 m/H
Overall Length without bucket 102.5 "
Overall Length with Bucket 132.4 "
Overall width without bucket 60 "
Overall height to top of ROPS 79.8 "
Bucket Hinge Pin Height 119.9 "
Bucket roll back at ground 30 °
Bucket roll back at maximum height 95 °
Angle of departure 29 °
Bucket dump height at maximum height 155.3 "
Bucket dump angle at maximum height 37 °
Operating weight 7,350.2 lb
Track width 12.6 "
Ground clearance 8.5 "
Length of Track on Ground 53.1 "
Dump reach at maximum height 39.1 "
Cylinder 4
Oil filling max. 2.5 gal US
Power rating max. 74 hp
Operating Engine speed 2,600 1/min
Starter battery Voltage 12 V
Engine Manufacturer Kohler
Engine Designation KDI2504TCR
Flow rate 19.3 gal/mi
Flow rate max. 28.8 gal/mi
Auxiliary relief pressure 3,480 psi
Cooling fluid volume 13.7 qt US
Hydraulic fluid volume 30.6 qt US
Fuel Tank capacity 27.2 gal US
Tip Load 5,599.7 lb
Rated Operating Capacity at 35% Tip Load 1,889.4 lb