SEALER, POLYSEAL WB-15, WATER BASED, CHEMMASTER ,5 GAL- NON YELLOWING

Polyseal WB creates a medium gloss membrane which remains clear throughout its service life. Polyseal WB can be colored with Polyseal WB Tint in a variety of standard and special colors.

Uses:

-Interior concrete where a curing compound that meets ASTM C1315 standards is desired, but where the fumes from a solvent based product would be objectionable.
-Exterior concrete curing where a non-yellowing formulation is preferred and water-based clean-up is desired.
-Enhance the color and provide a uniform appearance of dry shake hardened floors, integral colored concrete and acid stained concrete while curing and sealing the surface.
-Seal and dustproof older interior or exterior concrete.

Advantages:

-Protects concrete surfaces against deicing chemicals, fertilizers, salts, grease, oil, alkalies, mild acids and detergents.
-Minimizes spalling due to freeze-thaw cycle exposure, hair line checking, premature cracking, dusting and other common defects which result from improperly cured concrete.
-Seals out most construction dirt and stains, and prevents mortar, plaster and concrete droppings from bonding to concrete surfaces.
-Tint pack system available in twelve standard colors; special color matching available subject to minimum quantities.
-Tinted Polyseal WB may be used to cure or seal rough finished colored concrete and aids in hiding finishing imperfections or variations in color.