GRAFFITI REMOVER DEFACER 1 GALLON JUG

Graffiti Remover — Professional-Grade Graffiti Elimination for Masonry, Wood & Metal
Sure Klean Graffiti Remover is a low-odor, water-rinsable chemical cleaner engineered for contractors and trades professionals who need reliable graffiti removal from a wide range of surfaces. Formulated without methanol, methylene chloride, or other halogenated solvents, it is approved for use on projects with strict chemical restrictions. It effectively removes spray paints, magic markers, and a variety of other graffiti media from smooth masonry, split-faced concrete block, wood, and metal surfaces. Available in a 5-gallon container, it is sized for commercial and multi-site production work.

Unlike solvent-heavy alternatives, Graffiti Remover complies with all national, state, and district AIM VOC regulations and contains readily biodegradable materials — making it suitable for environmentally sensitive job sites. Its added body provides longer dwell times, better hang on vertical surfaces, and easier rinsing compared to thinner-formula competitors.
Graffiti Remover SKU# 57060-01GAL
Key Features & Benefits
No Prohibited Solvents
Graffiti Remover contains no methanol, methylene chloride, or halogenated solvents — chemicals that are banned on many public, commercial, and government projects. This makes it a compliant drop-in solution for jobs where solvent restrictions are specified in the scope of work.

Full VOC Regulatory Compliance
The formula is compliant with all national, state, and district AIM VOC regulations, with a maximum VOC content of 30%. Contractors working across multiple jurisdictions can use this product without reformulating their cleaning protocol for regional compliance requirements.

Added Body for Better Performance on Vertical Surfaces
The product's thickened consistency allows it to cling to vertical masonry walls during dwell time rather than running off immediately. This results in more consistent chemical contact with the graffiti media, reducing the number of applications needed and improving overall cleaning efficiency.

Water-Rinsable with Cold or Hot Water
Spent product and dissolved graffiti rinse away cleanly with cold or hot water, making cleanup straightforward on any job site. Masonry-washing equipment at 400–1,000 psi with a 6–8 gallon-per-minute flow rate provides the optimal rinse combination for porous substrates.

Compatible with Sacrificial Anti-Graffiti Coatings
Graffiti Remover serves as an excellent chemical assist for cold-water removal of PROSOCO Sacrificial Coating SC-1, making it a natural pairing in a complete graffiti management system. Importantly, it will not remove PROSOCO Blok-Guard & Graffiti Control permanent protective treatments, allowing those coatings to remain intact after cleaning.

Biodegradable Materials
The formulation contains readily biodegradable materials, reducing environmental impact during use and disposal. This is a practical advantage on LEED-targeted projects or in jurisdictions with stricter environmental handling requirements.

Common Applications
Spray Paint Removal from Masonry
Removes aerosol spray paint graffiti from smooth masonry and split-faced concrete block surfaces. Best results are achieved when masonry has been previously treated with an appropriate PROSOCO anti-graffiti protective product.

Magic Marker and Ink Graffiti Removal
Effective against permanent markers and ink-based graffiti on masonry, wood, and metal surfaces. Dwell time may vary depending on how deeply the ink has penetrated the substrate.

Graffiti Removal from Wood Surfaces
Suitable for use on wood substrates where other solvent-based removers may cause damage or leave residue. Always test a small area first to confirm suitability before full application.

Metal Surface Graffiti Removal
Cleans graffiti from metal surfaces including equipment, signage, and structural elements. Note that some metal finishes may be sensitive — pre-testing is required before overall application.

Removal of Sacrificial Anti-Graffiti Coatings
Functions as a chemical assist for cold-water removal of PROSOCO Sacrificial Coating SC-1, enabling crews to strip spent sacrificial coatings efficiently before reapplication.

Multi-Surface Graffiti Abatement Programs
Suitable for large-scale or ongoing graffiti abatement programs on municipal infrastructure, transit facilities, commercial buildings, and institutional properties where VOC compliance and surface versatility are critical.

Compatible Materials
Smooth masonry
Split-faced concrete block
Wood
Metal
Brick (per page description)
Natural stone (per page description)