AC100+GOLD 9.5 oz Vinylester Injection Adhesive Anchor System QUICK-SHOT-USE WITH STANDARD CAULK GUN-INCLUDES NOZZLE

Powers Fasteners 8478SD-PWR Description
Adhesive Anchoring System, Type Ac100+, Color Gray, Size 10 Fl. Oz., Container Type Cartridge, Mixing Ratio 10:1, Temp. Range (F) 14 To 104 Degrees, Functional Cure 15 Min. To 24 Hr., Full Cure 15 Min. To 24 Hr., Work Life 1 To 90 Min., Substrates Concrete, Application Rebar Doweling, Threaded Rod Bonding, For Use With Threaded Rod And Rebar Dowel.

Powers Fasteners 8478SD-PWR Includes
(1) Nozzle
Powers Fasteners 8478SD-PWR Features
A Two-Component Adhesive Anchoring System
Designed For Bonding Threaded Rod And Reinforcing Bar Hardware Into Drilled Holes In Concrete Base Materials
Epoxy Is Automatically Mixed When Dispensed Through Nozzle
Be Sure That Hole Is Properly Cleaned Of All Dust And Debris Prior To Injection Of Epoxy
Hole Should Be Filled Approximately 2/3 With Epoxy From The Back
Then Insert Anchoring System Or Rod While Turning To Ensure Positive Adhesive Distribution
Allow The Epoxy To Fully Cure Prior To Applying Any Load